E-TRAC LITE DRIVE UNITS
Position of drive determines the slot location for the entire system. Drives include 1/4 or 2 HP TEFC Inverter Duty Integral Mount or optional C-Face motor, parallel helical gear reducer, drive sprocket, power tubes and mounting plate.
VFD Controller required for each drive. Contact us for assistance with multi-drive applications. Optional remote pad and DIN rail kits are available.
Please contact us for the power requirements or C-Face motor applications.
VFD Controller required for each drive. Contact us for assistance with multi-drive applications. Optional remote pad and DIN rail kits are available.
Please contact us for the power requirements or C-Face motor applications.
-
Horizontal Inline Drive Unit
Simple and rugged, this new drive unit has no complicated or critical adjustments. Positive direct contact between sprocket teeth and chain provides constant straight line pull. -
Horizontal Drive Units
The 90 degree and 180 degree Horizontal Drives are desirable in applications where production requirements permit the use of these units. Closely spaced wide loads can collide or entangle when traveling around 90 degree or 180 degree horizontal drive configuration. -
Vertical Inline Drive Unit
The Vertical Inline Drive Unit is the most widely-used drive. The primary advantage is these units allow wide products to be suspended from an E-Trac Lite at closer intervals than is possible with other drives.