E-TRAC 6 OVERHEAD ENCLOSED TRACK CONVEYOR EQUIPMENT - DRIVE UNITS AND PARTS
All drives are rated for 750 pounds of chain pull. Multiple drive units must be used if the conveyor chain pull exceeds 750 pounds. Special drives for higher or lower speeds are available. Feel free to consult us for details. Toll Free in the US 877-338-9403. Our local number is 812-288-7466.
All stock drive motors are 230/460 volts, 60 hertz 3 phase. A friction clutch is mounted on the speed reducer Output Shaft.
In the event of a conveyor jam, the sprocket, (held between two friction disc), slips to protect the conveyor chain and drive unit.
Drive shipping weight ranges from 300 - 350 pounds.
Standard Drives:
E-12-100 Basic Drive Frame
E-12-200 Slow Speed Drive (16 fpm or less)
E-12-200-I Inverted Slow Speed
E-12-300 Fast Speed Drive
E-12-300-I Inverted Fast Speed
Standard drive units are available for speeds from 0-45 feet per minute. You must consider chain speed and voltage when ordering.
Consult 1stSource for any special drive requirements.
Other standard options:
E-12-470 Explosion proof motor
E-12-480 Brake motor
E-12-490 Clutch brake
E-12-500 230 VAC 3-15 fpm inverter
E-12-600 460 VAC 3-15 fpm inverter
E-12-700 230 VAC 15-45 fpm inverter
E-12-800 460 VAC 45-45 inverter
